Go to the documentation of this file.
13 #include <sys/ioctl.h>
69 #define MIN_PRE_1_3_19_PRIVATESTREAM 10
117 esyslog(
"ERROR: too many devices!");
133 for (time_t t0 = time(NULL); time(NULL) - t0 < Timeout; ) {
161 esyslog(
"ERROR: invalid value in nextCardIndex(%d)", n);
196 isyslog(
"setting primary device to %d", n + 1);
206 esyslog(
"ERROR: invalid primary device number: %d", n + 1);
235 int MaxNumProvidedSystems = (1 << AvailableBits) - 1;
237 if (NumProvidedSystems > MaxNumProvidedSystems) {
238 esyslog(
"ERROR: device %d supports %d modulation systems but cDevice::GetDevice() currently only supports %d delivery systems which should be fixed", Device->
DeviceNumber() + 1, NumProvidedSystems, MaxNumProvidedSystems);
239 NumProvidedSystems = MaxNumProvidedSystems;
241 else if (NumProvidedSystems <= 0) {
242 esyslog(
"ERROR: device %d reported an invalid number (%d) of supported delivery systems - assuming 1", Device->
DeviceNumber() + 1, NumProvidedSystems);
243 NumProvidedSystems = 1;
245 return NumProvidedSystems;
252 int SlotPriority[NumCamSlots];
253 int NumUsableSlots = 0;
254 bool InternalCamNeeded =
false;
268 InternalCamNeeded =
true;
271 bool NeedsDetachReceivers =
false;
275 uint32_t Impact = 0xFFFFFFFF;
276 for (
int j = 0; j < NumCamSlots || !NumUsableSlots; j++) {
277 if (NumUsableSlots && SlotPriority[j] >
MAXPRIORITY)
292 if ((csj->
MtdActive() ? csi->MasterSlot() : csi) != csj)
311 imp <<= 1; imp |= ndr;
312 imp <<= 1; imp |= (NumUsableSlots || InternalCamNeeded) ? 0 :
device[i]->
HasCi();
320 NeedsDetachReceivers = ndr;
330 if (!Query && NeedsDetachReceivers)
425 if (d->IsTunedToTransponder(Channel))
427 if (d->ProvidesTransponder(Channel)) {
428 if (d->MaySwitchTransponder(Channel))
430 else if (!d->Occupied() && !d->IsBonded()) {
474 int fd = open(FileName, O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC, DEFFILEMODE);
479 if (
safe_write(fd, Image, ImageSize) == ImageSize)
480 isyslog(
"grabbed image to %s", FileName);
505 switch (VideoDisplayFormat) {
515 default:
esyslog(
"ERROR: invalid value for VideoDisplayFormat '%d'", VideoDisplayFormat);
555 if (Pid || PidType ==
ptPcr) {
558 if (PidType !=
ptPcr) {
620 if (Pid || PidType ==
ptPcr) {
622 if (PidType ==
ptPcr)
696 return safe_read(Handle, Buffer, Length);
777 bool cDevice::SignalStats(
int &Valid,
double *Strength,
double *Cnr,
double *BerPre,
double *BerPost,
double *Per,
int *Status)
const
814 for (
int i = 3; i--;) {
816 case scrOk:
return true;
822 default:
esyslog(
"ERROR: invalid return value from SetChannel");
832 Direction =
sgn(Direction);
840 while ((Channel = Channels->GetByNumber(n, Direction)) != NULL) {
844 n = Channel->
Number() + Direction;
849 dsyslog(
"skipped channel %d", first);
851 dsyslog(
"skipped channels %d..%d", first, n -
sgn(d));
881 bool NeedsTransferMode = LiveView && Device !=
PrimaryDevice();
884 NeedsTransferMode =
true;
891 if (NeedsTransferMode) {
925 if (Result ==
scrOk) {
940 if (!NeedsTransferMode)
962 return Seconds > 0 ? Seconds : 0;
1032 return (0 <= c && c <= 2) ? c : 0;
1037 if (0 <= AudioChannel && AudioChannel <= 2)
1060 if (DescriptionsOnly) {
1104 esyslog(
"ERROR: SetAvailableTrack called with invalid Type/Index (%d/%d)", Type, Index);
1116 for (
int i = FirstTrack; i <= LastTrack; i++) {
1169 if (TrackId && TrackId->
id) {
1185 int PreferredAudioChannel = 0;
1186 int LanguagePreference = -1;
1189 for (
int i = StartCheck; i <= EndCheck; i++) {
1194 PreferredAudioChannel = pos;
1205 dsyslog(
"setting audio track to %d (%d)", PreferredTrack, PreferredAudioChannel);
1218 int LanguagePreference = INT_MAX;
1281 if (Data[0] == 0x47) {
1287 int Pid =
TsPid(Data);
1297 int NewSize = Size + l;
1298 if (
uchar *NewBuffer = (
uchar *)realloc(buf, NewSize)) {
1301 memcpy(buf + Offset, p, l);
1319 int NewSize = Size + l;
1320 if (
uchar *NewBuffer = (
uchar *)realloc(buf, NewSize)) {
1323 memcpy(buf + Offset, p, l);
1326 esyslog(
"ERROR: out of memory");
1369 if (Player &&
player == Player) {
1424 bool FirstLoop =
true;
1428 while (
Start < End) {
1429 int d = End -
Start;
1446 int PayloadOffset = Data[8] + 9;
1449 if ((Data[7] & 0x01) && (Data[PayloadOffset - 3] & 0x81) == 0x01 && Data[PayloadOffset - 2] == 0x81)
1452 uchar SubStreamId = Data[PayloadOffset];
1453 uchar SubStreamType = SubStreamId & 0xF0;
1454 uchar SubStreamIndex = SubStreamId & 0x1F;
1457 pre_1_3_19_PrivateStreamDetected:
1460 SubStreamType = 0x80;
1465 switch (SubStreamType) {
1496 dsyslog(
"switching to pre 1.3.19 Dolby Digital compatibility mode - substream id = %02X", SubStreamId);
1499 goto pre_1_3_19_PrivateStreamDetected;
1512 esyslog(
"ERROR: incomplete PES packet write!");
1528 while (i <= Length - 6) {
1529 if (Data[i] == 0x00 && Data[i + 1] == 0x00 && Data[i + 2] == 0x01) {
1531 if (i + l > Length) {
1532 esyslog(
"ERROR: incomplete PES packet!");
1539 return i == 0 ? w : i;
1545 esyslog(
"ERROR: leftover PES data!");
1606 esyslog(
"ERROR: skipped %d bytes of TS fragment", Length);
1611 if (
int Skipped =
TS_SYNC(Data, Length))
1612 return Played + Skipped;
1613 int Pid =
TsPid(Data);
1616 if (PayloadOffset <
TS_SIZE) {
1625 return Played ? Played : w;
1633 return Played ? Played : w;
1648 return Played ? Played : w;
1688 #define TS_SCRAMBLING_TIMEOUT 3 // seconds to wait until a TS becomes unscrambled
1689 #define TS_SCRAMBLING_TIME_OK 3 // seconds before a Channel/CAM combination is marked as known to decrypt
1690 #define EIT_INJECTION_TIME 10 // seconds for which to inject EIT event
1710 if (Receiver && Receiver->
WantsPid(Pid)) {
1718 time_t Now = time(NULL);
1742 time_t Now = time(NULL);
1782 if (Receiver->
device ==
this)
1786 #ifdef WAIT_FOR_TUNER_LOCK
1787 #define TUNER_LOCK_TIMEOUT 5000 // ms
1788 if (!
HasLock(TUNER_LOCK_TIMEOUT)) {
1796 for (
int n = 0; n < Receiver->
numPids; n++) {
1828 esyslog(
"ERROR: no free receiver slot!");
1834 if (!Receiver || Receiver->
device !=
this)
1836 bool receiversLeft =
false;
1842 receiversLeft =
true;
1849 for (
int n = 0; n < Receiver->
numPids; n++)
1868 if (Receiver && Receiver->
WantsPid(Pid))
1906 bool firstRead =
true;
1909 if (firstRead || Poller.
Poll(100)) {
1913 if (errno == EOVERFLOW)
1938 for (
int i = 1; i < Count; i++) {
1945 esyslog(
"ERROR: skipped %d bytes to sync on TS packet on device %d", Count,
deviceNumber);
const int * Caids(void) const
virtual void SetVolumeDevice(int Volume)
Sets the audio volume on this device (Volume = 0...255).
bool Poll(int TimeoutMs=0)
virtual bool ProvidesEIT(void) const
Returns true if this device provides EIT data and thus wants to be tuned to the channels it can recei...
int SubtitleLanguages[I18N_MAX_LANGUAGES+1]
bool Replaying(void) const
Returns true if we are currently replaying.
#define TS_SYNC(Data, Length)
bool Transferring(void) const
Returns true if we are currently in Transfer Mode.
void PlayTsAudio(const uchar *Data, int Length)
virtual bool HasInternalCam(void)
Returns true if this device handles encrypted channels itself without VDR assistance.
friend class cLiveSubtitle
virtual void SetAudioChannelDevice(int AudioChannel)
Sets the audio channel to stereo (0), mono left (1) or mono right (2).
virtual void CloseDvr(void)
Shuts down the DVR.
bool IsPmtPid(int Pid) const
Returns true if Pid the one of the PMT pids as defined by the current PAT.
static int GetClippedNumProvidedSystems(int AvailableBits, cDevice *Device)
cSectionHandler * sectionHandler
bool CamDecrypt(tChannelID ChannelID, int CamSlotNumber)
cTSBuffer(int File, int Size, int DeviceNumber)
static bool WaitForAllDevicesReady(int Timeout=0)
Waits until all devices have become ready, or the given Timeout (seconds) has expired.
static int CurrentChannel(void)
Returns the number of the current channel on the primary device.
int currentAudioTrackMissingCount
virtual bool HasProgramme(void) const
Returns true if the device is currently showing any programme to the user, either through replaying o...
virtual bool SetChannelDevice(const cChannel *Channel, bool LiveView)
Sets the device to the given channel (actual physical setup).
const char * Name(void) const
void EnsureSubtitleTrack(void)
Makes sure one of the preferred language subtitle tracks is selected.
virtual cString DeviceName(void) const
Returns a string identifying the name of this device.
void SetTimeouts(int PutTimeout, int GetTimeout)
const T * Get(int Index) const
Returns the list element at the given Index, or NULL if no such element exists.
virtual bool GetTSPacket(uchar *&Data)
Gets exactly one TS packet from the DVR of this device and returns a pointer to it in Data.
virtual void Activate(bool On)
void SetChannel(const cChannel *Channel)
#define LOCK_CHANNELS_READ
void AttachFilter(cFilter *Filter)
Attaches the given filter to this device.
virtual int64_t GetSTC(void)
Gets the current System Time Counter, which can be used to synchronize audio, video and subtitles.
int NumTracks(eTrackType FirstTrack, eTrackType LastTrack) const
Returns the number of tracks in the given range that are currently available.
virtual int Available(void)
const char * Alang(int i) const
bool I18nIsPreferredLanguage(int *PreferredLanguages, const char *LanguageCode, int &OldPreference, int *Position)
Checks the given LanguageCode (which may be something like "eng" or "eng+deu") against the PreferredL...
int Ppid(void) const
Returns the PCR pid as defined by the current PMT, or 0 if no PCR pid has been detected,...
virtual bool IsTunedToTransponder(const cChannel *Channel) const
Returns true if this device is currently tuned to the given Channel's transponder.
void ReleaseCamSlot(void)
Releases the CAM slot if it is currently not used.
int Convert(const uchar *Data, int Length)
virtual void SetDigitalAudioDevice(bool On)
Tells the output device that the current audio track is Dolby Digital.
virtual void setScaleMode(cSpuDecoder::eScaleMode ScaleMode)=0
#define MIN_PRE_1_3_19_PRIVATESTREAM
virtual cString DeviceType(void) const
Returns a string identifying the type of this device (like "DVB-S").
virtual const cPositioner * Positioner(void) const
Returns a pointer to the positioner (if any) this device has used to move the satellite dish to the r...
virtual bool OpenDvr(void)
Opens the DVR of this device and prepares it to deliver a Transport Stream for use in a cReceiver.
void EnsureAudioTrack(bool Force=false)
Makes sure an audio track is selected that is actually available.
char language[MAXLANGCODE2]
cLiveSubtitle * liveSubtitle
int Priority(void) const
Returns the priority of the current receiving session (-MAXPRIORITY..MAXPRIORITY),...
eTrackType GetCurrentAudioTrack(void) const
#define MAXOCCUPIEDTIMEOUT
virtual bool MaySwitchTransponder(const cChannel *Channel) const
Returns true if it is ok to switch to the Channel's transponder on this device, without disturbing an...
virtual void StartDecrypting(void)
Sends all CA_PMT entries to the CAM that have been modified since the last call to this function.
static void MsgSetVolume(int Volume, bool Absolute)
eSetChannelResult SetChannel(const cChannel *Channel, bool LiveView)
Sets the device to the given channel (general setup).
void SetDecrypt(tChannelID ChannelID, int CamSlotNumber)
bool AddPid(int Pid, ePidType PidType=ptOther, int StreamType=0)
Adds a PID to the set of PIDs this device shall receive.
bool SetCurrentSubtitleTrack(eTrackType Type, bool Manual=false)
Sets the current subtitle track to the given Type.
cDeviceHook(void)
Creates a new device hook object.
void Add(cListObject *Object, cListObject *After=NULL)
bool Receiving(bool Dummy=false) const
Returns true if we are currently receiving. The parameter has no meaning (for backwards compatibility...
cMutex mutexCurrentAudioTrack
void SetChecked(tChannelID ChannelID, int CamSlotNumber)
virtual int NumProvidedSystems(void) const
Returns the number of individual "delivery systems" this device provides.
static int NextCardIndex(int n=0)
Calculates the next card index.
virtual bool Flush(int TimeoutMs=0)
Returns true if the device's output buffers are empty, i.
virtual int PlayVideo(const uchar *Data, int Length)
Plays the given data block as video.
virtual void DetachAllReceivers(void)
Detaches all receivers from this device.
virtual void Action(void)
A derived cThread class must implement the code it wants to execute as a separate thread in this func...
bool SetCurrentAudioTrack(eTrackType Type)
Sets the current audio track to the given Type.
void Cancel(int WaitSeconds=0)
Cancels the thread by first setting 'running' to false, so that the Action() loop can finish in an or...
eTrackType GetCurrentSubtitleTrack(void) const
virtual void CloseFilter(int Handle)
Closes a file handle that has previously been opened by OpenFilter().
int Read(int FileHandle, int Max=0)
Reads at most Max bytes from FileHandle and stores them in the ring buffer.
bool HasPid(int Pid) const
Returns true if this device is currently receiving the given PID.
static cDevice * PrimaryDevice(void)
Returns the primary device.
int QueueMessage(eMessageType Type, const char *s, int Seconds=0, int Timeout=0)
Like Message(), but this function may be called from a background thread.
bool CamChecked(tChannelID ChannelID, int CamSlotNumber)
virtual int PlayAudio(const uchar *Data, int Length, uchar Id)
Plays the given data block as audio.
bool WantsTsData(void) const
Returns true if this CAM slot wants to receive the TS data through its Decrypt() function.
virtual bool ProvidesTransponder(const cChannel *Channel) const
Returns true if this device can provide the transponder of the given Channel (which implies that it c...
virtual void TrickSpeed(int Speed, bool Forward)
Sets the device into a mode where replay is done slower.
virtual void SetVideoDisplayFormat(eVideoDisplayFormat VideoDisplayFormat)
Sets the video display format to the given one (only useful if this device has an MPEG decoder).
void ParsePat(const uchar *Data, int Length)
Parses the PAT data from the single TS packet in Data.
void StopReplay(void)
Stops the current replay session (if any).
virtual bool HasCi(void)
Returns true if this device has a Common Interface.
uchar * Get(int *Available=NULL, bool CheckAvailable=false)
Returns a pointer to the first TS packet in the buffer.
static cDevice * GetDevice(int Index)
Gets the device with the given Index.
void DetachAll(int Pid)
Detaches all receivers from this device for this pid.
virtual void SetPid(int Pid, bool Active)
Sets the given Pid (which has previously been added through a call to AddPid()) to Active.
virtual void Receive(const uchar *Data, int Length)
This function is called from the cDevice we are attached to, and delivers one TS packet from the set ...
cDvbSubtitleConverter * dvbSubtitleConverter
cRingBufferLinear * ringBuffer
virtual bool Assign(cDevice *Device, bool Query=false)
Assigns this CAM slot to the given Device, if this is possible.
int CardIndex(void) const
Returns the card index of this device (0 ... MAXDEVICES - 1).
void SetCamSlot(cCamSlot *CamSlot)
Sets the given CamSlot to be used with this device.
#define TS_SCRAMBLING_TIME_OK
virtual void MakePrimaryDevice(bool On)
Informs a device that it will be the primary device.
int TsPayloadOffset(const uchar *p)
int Vpid(void) const
Returns the video pid as defined by the current PMT, or 0 if no video pid has been detected,...
int TsPid(const uchar *p)
virtual void SetSubtitleTrack(eTrackType Type, const tTrackId *TrackId)
void Detach(cFilter *Filter)
Detaches the given filter from this device.
virtual bool CanReplay(void) const
Returns true if this device can currently start a replay session.
void Detach(cFilter *Filter)
bool Running(void)
Returns false if a derived cThread object shall leave its Action() function.
virtual bool ProvidesTransponderExclusively(const cChannel *Channel) const
Returns true if this is the only device that is able to provide the given channel's transponder.
virtual void SetVideoFormat(bool VideoFormat16_9)
Sets the output video format to either 16:9 or 4:3 (only useful if this device has an MPEG decoder).
void SetAudioChannel(int AudioChannel)
Sets the audio channel to stereo (0), mono left (1) or mono right (2).
virtual eModuleStatus ModuleStatus(void)
Returns the status of the CAM in this slot.
bool IsPrimaryDevice(void) const
bool ToggleMute(void)
Turns the volume off or on and returns the new mute state.
eTrackType currentAudioTrack
virtual int PlaySubtitle(const uchar *Data, int Length)
Plays the given data block as a subtitle.
bool GrabImageFile(const char *FileName, bool Jpeg=true, int Quality=-1, int SizeX=-1, int SizeY=-1)
Calls GrabImage() and stores the resulting image in a file with the given name.
void Skip(int Count)
If after a call to Get() more or less than TS_SIZE of the available data has been processed,...
bool AttachPlayer(cPlayer *Player)
Attaches the given player to this device.
static void Launch(cControl *Control)
virtual bool DeviceProvidesTransponder(const cDevice *Device, const cChannel *Channel) const
Returns true if the given Device can provide the given Channel's transponder.
static void Shutdown(void)
Closes down all devices.
virtual void GetVideoSize(int &Width, int &Height, double &VideoAspect)
Returns the Width, Height and VideoAspect ratio of the currently displayed video material.
#define EIT_INJECTION_TIME
static bool SetPrimaryDevice(int n)
Sets the primary device to 'n'.
const char * Dlang(int i) const
void Del(int Count)
Deletes at most Count bytes from the ring buffer.
virtual bool SetPid(cPidHandle *Handle, int Type, bool On)
Does the actual PID setting on this device.
virtual int PlayTsSubtitle(const uchar *Data, int Length)
Plays the given data block as a subtitle.
virtual bool IsActivating(void)
Returns true if this CAM slot is currently activating a smart card.
virtual void StillPicture(const uchar *Data, int Length)
Displays the given I-frame as a still picture.
int MasterSlotNumber(void)
Returns the number of this CAM's master slot within the whole system.
A steerable satellite dish generally points to the south on the northern hemisphere,...
int PesLength(const uchar *p)
bool TsHasPayload(const uchar *p)
bool AddPid(int Pid)
Adds the given Pid to the list of PIDs of this receiver.
bool DeviceHooksProvidesEIT(void) const
virtual bool ProvidesCa(const int *CaSystemIds)
Returns true if the CAM in this slot provides one of the given CaSystemIds.
virtual void SetAudioTrack(eTrackType Type, const tTrackId *TrackId)
bool TsIsScrambled(const uchar *p)
time_t startScrambleDetection
cString ToString(void) const
void DelPid(int Pid, ePidType PidType=ptOther)
Deletes a PID from the set of PIDs this device shall receive.
tChannelID ChannelID(void)
void SetVolume(int Volume, bool Absolute=false)
Sets the volume to the given value, either absolutely or relative to the current volume.
bool SetAvailableTrack(eTrackType Type, int Index, uint16_t Id, const char *Language=NULL, const char *Description=NULL)
Sets the track of the given Type and Index to the given values.
virtual int PlayTsVideo(const uchar *Data, int Length)
Plays the given data block as video.
static cDevice * ReceiverDevice(void)
cCamSlot * CamSlot(void) const
Returns the CAM slot that is currently used with this device, or NULL if no CAM slot is in use.
virtual void Freeze(void)
Puts the device into "freeze frame" mode.
virtual bool TsPostProcess(uchar *Data)
If there is a cCiSession that needs to do additional processing on TS packets (after the CAM has done...
#define IS_AUDIO_TRACK(t)
virtual void Action(void)
A derived cThread class must implement the code it wants to execute as a separate thread in this func...
cPidHandle pidHandles[MAXPIDHANDLES]
void StopSectionHandler(void)
A device that has called StartSectionHandler() must call this function (typically in its destructor) ...
bool AttachReceiver(cReceiver *Receiver)
Attaches the given receiver to this device.
const T * First(void) const
Returns the first element in this list, or NULL if the list is empty.
void DelLivePids(void)
Deletes the live viewing PIDs.
bool TsPayloadStart(const uchar *p)
virtual int PlayTs(const uchar *Data, int Length, bool VideoOnly=false)
Plays the given TS packet.
cCamSlot * MtdSpawn(void)
If this CAM slot can do MTD ("Multi Transponder Decryption"), a call to this function returns a cMtdC...
cChannelCamRelations ChannelCamRelations
uchar * Get(int &Count)
Gets data from the ring buffer.
void Attach(cFilter *Filter)
void SetOccupied(int Seconds)
Sets the occupied timeout for this device to the given number of Seconds, This can be used to tune a ...
cMutex mutexCurrentSubtitleTrack
virtual void SetAudioTrackDevice(eTrackType Type)
Sets the current audio track to the given value.
virtual void GetOsdSize(int &Width, int &Height, double &PixelAspect)
Returns the Width, Height and PixelAspect ratio the OSD should use to best fit the resolution of the ...
void Reset(void)
Resets the parser.
const tTrackId * GetTrack(eTrackType Type)
Returns a pointer to the given track id, or NULL if Type is not less than ttMaxTrackTypes.
int NumReadyMasterSlots(void)
Returns the number of master CAM slots in the system that are ready to decrypt.
void PutTs(const uchar *Data, int Length)
Puts the payload data of the single TS packet at Data into the converter.
bool DeviceHooksProvidesTransponder(const cChannel *Channel) const
cCamSlot * MasterSlot(void)
Returns this CAM slot's master slot, or a pointer to itself if it is a master slot.
virtual void Mute(void)
Turns off audio while replaying.
static cDevice * primaryDevice
int NumAudioTracks(void) const
Returns the number of audio tracks that are currently available.
virtual void AddChannel(const cChannel *Channel)
Adds all PIDs of the given Channel to the current list of PIDs.
static int NumDevices(void)
Returns the total number of devices.
int GetAudioChannel(void)
Gets the current audio channel, which is stereo (0), mono left (1) or mono right (2).
const char * Slang(int i) const
virtual bool IsDecrypting(void)
Returns true if the CAM in this slot is currently used for decrypting.
virtual bool Poll(cPoller &Poller, int TimeoutMs=0)
Returns true if the device itself or any of the file handles in Poller is ready for further action.
virtual bool SetPlayMode(ePlayMode PlayMode)
Sets the device into the given play mode.
cReceiver * receiver[MAXRECEIVERS]
int ConvertFragments(const uchar *Data, int Length)
static void SleepMs(int TimeoutMs)
Creates a cCondWait object and uses it to sleep for TimeoutMs milliseconds, immediately giving up the...
static cDevice * ActualDevice(void)
Returns the actual receiving device in case of Transfer Mode, or the primary device otherwise.
virtual bool AvoidRecording(void) const
Returns true if this device should only be used for recording if no other device is available.
virtual bool ProvidesSource(int Source) const
Returns true if this device can provide the given source.
int Ca(int Index=0) const
virtual int PlayTsAudio(const uchar *Data, int Length)
Plays the given data block as audio.
virtual int PlayPesPacket(const uchar *Data, int Length, bool VideoOnly=false)
Plays the single PES packet in Data with the given Length.
virtual int GetAudioChannelDevice(void)
Gets the current audio channel, which is stereo (0), mono left (1) or mono right (2).
void ForceTransferMode(void)
Forces the device into transfermode for the current channel.
static cDevice * GetDeviceForTransponder(const cChannel *Channel, int Priority)
Returns a device that is not currently "occupied" and can be tuned to the transponder of the given Ch...
virtual void SetSubtitleTrackDevice(eTrackType Type)
Sets the current subtitle track to the given value.
bool SwitchChannel(const cChannel *Channel, bool LiveView)
Switches the device to the given Channel, initiating transfer mode if necessary.
void ParsePmt(const uchar *Data, int Length)
Parses the PMT data from the single TS packet in Data.
tChannelID GetChannelID(void) const
void SetDescription(const char *Description,...) __attribute__((format(printf
void StartSectionHandler(void)
A derived device that provides section data must call this function (typically in its constructor) to...
virtual void Clear(void)
Clears all video and audio data from the device.
virtual void Play(void)
Sets the device into play mode (after a previous trick mode).
bool autoSelectPreferredSubtitleLanguage
int DeviceNumber(void) const
Returns the number of this device (0 ... numDevices - 1).
virtual void Receive(const uchar *Data, int Length)=0
This function is called from the cDevice we are attached to, and delivers one TS packet from the set ...
void PlayAudio(const uchar *Data, int Length, uchar Id)
virtual int SignalStrength(void) const
Returns the "strength" of the currently received signal.
int Occupied(void) const
Returns the number of seconds this device is still occupied for.
static void SetUseDevice(int n)
Sets the 'useDevice' flag of the given device.
virtual cSpuDecoder * GetSpuDecoder(void)
Returns a pointer to the device's SPU decoder (or NULL, if this device doesn't have an SPU decoder).
const T * Next(const T *Object) const
< Returns the element immediately before Object in this list, or NULL if Object is the first element ...
virtual void Activate(bool On)
This function is called just before the cReceiver gets attached to (On == true) and right after it ge...
int pre_1_3_19_PrivateStream
virtual int SignalQuality(void) const
Returns the "quality" of the currently received signal.
virtual uchar * GrabImage(int &Size, bool Jpeg=true, int Quality=-1, int SizeX=-1, int SizeY=-1)
Grabs the currently visible screen image.
void bool Start(void)
Sets the description of this thread, which will be used when logging starting or stopping of the thre...
virtual bool ProvidesChannel(const cChannel *Channel, int Priority=IDLEPRIORITY, bool *NeedsDetachReceivers=NULL) const
Returns true if this device can provide the given channel.
tTrackId availableTracks[ttMaxTrackTypes]
void Reset(void)
Resets the converter.
virtual void InjectEit(int Sid)
Injects a generated EIT with a "present event" for the given Sid into the TS data stream sent to the ...
int NumSubtitleTracks(void) const
Returns the number of subtitle tracks that are currently available.
virtual int OpenFilter(u_short Pid, u_char Tid, u_char Mask)
Opens a file handle for the given filter data.
static int currentChannel
cDevice * Device(void)
Returns the device this CAM slot is currently assigned to.
virtual bool HasIBPTrickSpeed(void)
Returns true if this device can handle all frames in 'fast forward' trick speeds.
static void MsgChannelSwitch(const cDevice *Device, int ChannelNumber, bool LiveView)
static cList< cDeviceHook > deviceHooks
bool MtdActive(void)
Returns true if MTD is currently active.
virtual bool HasLock(int TimeoutMs=0) const
Returns true if the device has a lock on the requested transponder.
void SetRepeatLast(void)
Makes the next call to GetPes() return exactly the same data as the last one (provided there was no c...
static cDevice * device[MAXDEVICES]
virtual bool HasDecoder(void) const
Tells whether this device has an MPEG decoder.
void ClrAvailableTracks(bool DescriptionsOnly=false, bool IdsOnly=false)
Clears the list of currently available tracks.
virtual int PlayPes(const uchar *Data, int Length, bool VideoOnly=false)
Plays all valid PES packets in Data with the given Length.
#define IS_SUBTITLE_TRACK(t)
virtual int ReadFilter(int Handle, void *Buffer, size_t Length)
Reads data from a handle for the given filter.
int AudioLanguages[I18N_MAX_LANGUAGES+1]
virtual bool SignalStats(int &Valid, double *Strength=NULL, double *Cnr=NULL, double *BerPre=NULL, double *BerPost=NULL, double *Per=NULL, int *Status=NULL) const
Returns statistics about the currently received signal (if available).
const uchar * GetPes(int &Length)
Gets a pointer to the complete PES packet, or NULL if the packet is not complete yet.
cPatPmtParser patPmtParser
int Priority(void)
Returns the priority of the device this slot is currently assigned to, or IDLEPRIORITY if it is not a...
#define TS_SCRAMBLING_TIMEOUT
static void Shutdown(void)
eTrackType currentSubtitleTrack
time_t lastScrambledPacket
virtual bool DeviceProvidesEIT(const cDevice *Device) const
Returns true if the given Device can provide EIT data.
virtual const cChannel * GetCurrentlyTunedTransponder(void) const
Returns a pointer to the currently tuned transponder.
#define IS_DOLBY_TRACK(t)
virtual bool Ready(void)
Returns true if this device is ready.